Installation of screen on slide-panel windows or doors

Реферат: THE ASSEMBLY SET OF SCREEN TO KEEP OUT INSECTS FOR SLIDE-PANEL WINDOWS OR DOORS, WHEN INSTALLATION OF THE SCREEN IS COMPLETED, SHALL INCLUDE: A FRAME SET DESIGNED TO CONTAIN THE MECHANISM OF A ROLLED- FOR-STORAGE SCREEN COMPRISING A SLIDE-PANEL FRAME (1), A REINFORCED STEEL SLIDE-PANEL FRAME (2) ASSEMBLED INTO A READYMADE SLIDE-PANEL FRAME, THE TOP SIDE AND THE LOWER SIDE OF THE SLIDE-PANEL FRAME (1) ASSEMBLED TO A SLIDE-PANEL MIDDLE COLUMN STRING (3), ACTING AS A SEPARATOR OF THE FIXED LIGHT WINDOW AND THE SCREEN PANEL, FIXED TO EACH OTHER BY SCREWS. THEN, SCREEN ROLL AND ITS MECHANISM (4) ARE ASSEMBLED WITH A T-BAR IRON (5), THE SCREEN HEAD AND END ARE COVERED AND ATTACHED TO THE SLIDE-PANEL MIDDLE COLUMN STRING (3), FIXED TO THE SLIDE-PANEL FRAME (1) WITH SCREWS, THEN A SCREEN ROLL COVER STRING (7) IS USED TO COVER THE SCREEN ROLL AND ITS MECHANISM (4) TO HIDE THEM FROM VIEW. THE TOP AND LOWER SIDE OF THE SLIDE-PANEL FRAME (1) ARE MADE INTO SCREEN GROOVES IN ORDER TO INSTALL A SCREEN TRACK STRIP (8) ONTO THE SLIDE-PANEL FRAME (1). THE OPEN-CLOSE DIRECTION DEPENDS ON WHICH SIDE THE SCREEN WILL LOCK. THE LOCKING SIDE MUST HAVE A PULL-TYPE LOCKING POINT USING A MAGNETIC TAB (9) ATTACHED TO THE SCREEN TRACK STRIP (8), AND THE SCREEN SIDE MUST HAVE A HANDLE BAR (10) WITH A MAGNETIC TAB (9) INSIDE. WHEN THE SCREEN IS TO BE LOCKED, THE SCREEN ROLL CAN BE PULLED DOWN BY THE HANDLE BAR (10) AND BOTH MAGNETIC TABS ARE ALLOWED TO ATTRACT EACH OTHER.THE INSTALLATION OF SLIDE-PANEL WINDOWS OR DOORS (12) WITH SLIDEPANEL WINDOW AND DOOR REINFORCED STEEL (13) ONTO THE SLIDEPANEL FRAME (1), REQUIRES THE GROOVES OF THE SLIDE-PANEL WINDOWS OR DOORS (12) TO BE POSITIONED TO THE TRACK OF THE SLIDE-PANEL FRAME (1).AFTER INSTALLATION, USE A SLIDE-PANEL RUBBER SEAL (15) FOR FIXING TO THE GROOVES OF THE SLIDE-PANEL WINDOWS OR DOORS (12).(FIG 7)