AUSKLAPPBARER SITZ FUER SEGELBOOTE

[UNK]

Decksverbindung fuer Bootskoerper

KIELFLOSSENBEFESTIGUNG

BOOTSKOERPER FUER EIN SEGELBOOT AUS GLASFASERVERSTAERKTEM KUNSTSTOFF

Auspuffanlage fuer Brennkraftmaschine zum Antrieb von Booten

BOOTSKOERPER FUER EIN SEGELBOOT SOWIE VORRICHTUNG UND VERFAHREN ZU DESSEN HERSTELLUNG

EINSPRENGPROFIL FUER SCHALENVERBINDER

Foam blocks bonded to fabric carrier - each block separated from its neigh-bour

The carrier is a knitted, woven or braided fabric which is passed through the moulding unit so that the separate hard foam blocks are integrally bonded to the carrier. Each block has its own firm outer skin, and the corners are planed or rounded at the top and bottom to allow movement when the material is shaped for sailing boat building. The purpose is to give an improved load-bearing characteristic compared with conventional techniques of cutting large foam blocks.

VORRICHTUNG ZUM SETZEN UND EINHOLEN EINES SPINNAKERS

Battery charge terminal for electric car - has stationary contact set in fixed relation to track rails, running downwards relative to contact set which mates with moving car set

The battery charge terminal has a stationary contact set for connection to a mobile contact set on the electrically driven car. The stationary contact set (12) is mounted in a given spatial arrangement to track rails (10) which are downwards inclined in the direction of the stationary contact set. The mobile contact set (15) on the car (14) can be brought in such position as to permit easy connection with the stationary set when the car runs on the rails. The rails are pref. arranged on a rocking arrangement. Both the contact sets may consist of two mutually crosswise extending rails, or other elements. The contact sets may be arranged behind deformable covers which open automatically on approach of the two contact sets. These covers may be foldable as a bellows and/or flaps. Alternately, the contact sets may be formed by flat abutting plates, with switching contacts for the charging circuit behind them.

TRAEGERFAHRZEUG FUER PONTONS OD.DGL

BOOTSKOERPER AUS FASERVERSTAERKTEM KUNSTSTOFF FUER EIN SEGELBOOT

SKI UND VERFAHREN ZU DESSEN HERSTELLUNG

Segelboots-Rumpf aus insbesondere faserverstaerktem Kunststoff

Kantenverbindung,insbesondere fuer Segelboote,Behaelter od.dgl.

Clamp for edges of moulded foam dish components - - by anchor embedded in foam

When the outer laminated layers of the component are placed in the mould, an anchor plug is inserted at the edges with a profiled end ranging into the foaming area and the projecting end shaped with a locating face for correct positioning in a recess in the mould. The purpose is to provide a consistent foaming action, without any deterioration in the quality of the foam, and to give clean edges which require no further cleaning or finishing work with a suitable mounting unit embedded in place.

VORRICHTUNG ZUR SELBSTTAETIGEN ANPASSUNG DER WOELBUNGSTIEFE EINES SEGELS AN DEN JEWEILIGEN WINDEINFALLSWINKEL

BOOTSKOERPER AUS FASERVERSTAERKTEM KUNSTSTOFF FUER EIN SEGELBOOT

Corner connection between the cover and outer skin sandwich shell of a plastic boat hull

Fin, method and device for their manufacture