Process for the fabrication of nuclear fuel elements
Номер патента: GB1206559A
Опубликовано: 23-09-1970
Автор(ы): Claude Moreau
Принадлежит: Commissariat a lEnergie Atomique CEA
Опубликовано: 23-09-1970
Автор(ы): Claude Moreau
Принадлежит: Commissariat a lEnergie Atomique CEA
Реферат: 1,206,559. Fuel elements. COMMISSARIAT A L'ENERGIE ATOMIQUE. 10 Sept., 1969 [23 Sept., 1968], No. 44649/69. Heading G6C. Fuel elements, in particular for high temperature, gas cooled, pebble-bed reactors, are made by coating refractory nuclear fuel particles 4 with a layer of graphite by spraying with a mixture containing the graphite and an organic diluent; forming a "green" jacket 2 by shaping and drying a paste formed of graphite powder and a binder; filling the jacket 2 with the coated particles 4; closing the jacket with a plug 8 formed of the same paste; and baking the jacket and impregnating it with pyrocarbon in a single operation by heating to between 850 and 1100 C. in a gaseous hydrocarbon atmosphere. In the embodiment described, the fuel particles are sprayed with a mixture of micronized natural graphite, coal tar pitch and benzene during agitation in a rotating drum. The particle size is preferably within the range 100 to 400 Á. After coating, the benzene is removed by evaporation, a small proportion of graphite powder (passing a 100 Á aperture screen) is added to the particles, and the particles and graphite are introduced into the jacket and lightly compacted. The graphite powder for the jacket is of standard nuclear-grade and passes a screen having a mesh size of 80 Á. When the fuel permits the use of an aqueous binder, this is advantageously a dispersion in water of polysaccharides, mucilages, starch or alginates. In the case of an organic binder which must be used with hydrolyzable fuels, a drying oil (linseed oil or china wood oil) or ethylcellulose dissolved in a volatile solvent (ortho-dichlorobenzene, benzene or toluene) is used. The fuel particles comprise the oxides, carbides or nitrides of U (enriched) or Pu. The impregnation step may be effected by heating in a flow of natural gas having a methane base at 950 C. for 300 hours, following degassing in a partial vacuum at 500 C. The binder is thereby carbonized and mostly eliminated, and the pores of the jacket and the voids in the mixture of coated particles and graphite are filled with a deposit of pyrocarbon. The resultant cylindrical fuel element is placed within the bore of a graphite sphere or shell 6, the bore then being sealed by means of a graphite plug 10 which is screwed in position and bonded with furfuryl resin. The fuel element may alternatively have a tubular instead of a cylindrical shape (Fig. 2, not shown).
Spring installation device for rod-type fuel element of nuclear reactor
Номер патента: RU2436178C2. Автор: Серж ФАНТИНИ,Жан-Люк АЛЛАР,Патрик ВАССЕР. Владелец: Арева Нс. Дата публикации: 2011-12-10.